Need help?Do you have a question about the Thinget XC3-24RT-E and is the answer not in the manual?
Details the XC series PLC introduction and its two program formats: Statement and Ladder.
Explains the naming conventions and available models for XC series PLCs, including sub-series like XC1, XC3, and XC5.
Lists the general specifications of XC series PLC, including insulate voltage, ambient conditions, and communication ports.
Details the pin assignments and functions for COM ports 1 and 2 on XC series PLC.
Details the power specifications for XC series PLC, covering AC and DC power types.
Explains the constitution and connection for AC power and DC input types in XC series PLC.
Provides specifications for input signals, including voltage, current, response time, and insulation for basic units and expansions.
Details output specifications for Relay output and Transistor output types, including power, insulation, and response time.
Introduces various soft units of programmable controllers, including input/output relays, auxiliary relays, timers, and counters.
Explains the numbering and functions of timers (T) in XC series PLCs, covering accumulated and non-accumulated types.
Covers the IDs and functions of counters (C), including 16-bit, 32-bit, and high-speed counters.
Lists common SFC instructions for XC1, XC3, and XC5 series PLCs with their mnemonics and functions.
Explains the LD, LDI, and OUT instructions for logical operations and coil drive in PLC programming.
Lists common applied instructions for XC1/XC3/XC5 series PLCs, categorized by sort (Program Flow, Data Compare, Data Move, Data Operation, Data Shift, Data Convert, Float Point Operation, Clock Operation).
Explains the high-speed count function of XC series PLCs, including increment, pulse+direction, and AB phase modes.
Details the pulse output function, including single direction, speedup/speed-down, and dual pulse outputs.
Covers communication functions, including COM ports (RS232, RS485, CAN) and Modbus master/slave configurations.
Covers interrupt functions, including external interrupt ports and the EI/DI/IRET instructions for managing interruption bounds.
Details the XC series PLC introduction and its two program formats: Statement and Ladder.
Explains the naming conventions and available models for XC series PLCs, including sub-series like XC1, XC3, and XC5.
Lists the general specifications of XC series PLC, including insulate voltage, ambient conditions, and communication ports.
Details the pin assignments and functions for COM ports 1 and 2 on XC series PLC.
Details the power specifications for XC series PLC, covering AC and DC power types.
Explains the constitution and connection for AC power and DC input types in XC series PLC.
Provides specifications for input signals, including voltage, current, response time, and insulation for basic units and expansions.
Details output specifications for Relay output and Transistor output types, including power, insulation, and response time.
Introduces various soft units of programmable controllers, including input/output relays, auxiliary relays, timers, and counters.
Explains the numbering and functions of timers (T) in XC series PLCs, covering accumulated and non-accumulated types.
Covers the IDs and functions of counters (C), including 16-bit, 32-bit, and high-speed counters.
Lists common SFC instructions for XC1, XC3, and XC5 series PLCs with their mnemonics and functions.
Explains the LD, LDI, and OUT instructions for logical operations and coil drive in PLC programming.
Lists common applied instructions for XC1/XC3/XC5 series PLCs, categorized by sort (Program Flow, Data Compare, Data Move, Data Operation, Data Shift, Data Convert, Float Point Operation, Clock Operation).
Explains the high-speed count function of XC series PLCs, including increment, pulse+direction, and AB phase modes.
Details the pulse output function, including single direction, speedup/speed-down, and dual pulse outputs.
Covers communication functions, including COM ports (RS232, RS485, CAN) and Modbus master/slave configurations.
Covers interrupt functions, including external interrupt ports and the EI/DI/IRET instructions for managing interruption bounds.
General| Series | XC3 |
|---|---|
| Points | 24 |
| Output Type | Relay |
| Power Supply | 24V DC |
| Ethernet Ports | 1 |
| Operating Temperature | -20°C to 60°C |
| USB Ports | 1 |
To Next Page
