Thinget XC Series User Manual

Summary of XC series PLC
XC Series Programmable Controller
User's Manual
Xinje Electronic Co., Ltd.
1

Thinget XC Series Specifications

General

Brand	Thinget
Model	XC Series
Category	Controller
Language	English

Summary

Precautions

General Safety and Application Guidelines

Essential safety practices and correct application procedures to ensure safe and proper operation.

2. Power Specifications

AC Power Specifications

Details voltage, frequency, and consumption for AC power supply units.

DC Power Specifications

Outlines voltage, current, and consumption for DC power supply units.

2-3. Input Specification

Basic Units Input Specification

Specifies voltage, current, response time, and insulation for basic unit inputs.

Expansions Input Specification

2-5. Output Specification

Relay Output Specification

Defines parameters for relay outputs including power, insulation, load capacity, and response time.

Transistor Output Specification

Details specifications for transistor outputs, covering power, insulation, load, and response time.

2-7. Transistor Output Circuit Disposal

Output Terminal and Insulation

3. Soft Unit Usage and Function

3-1. Every Soft Unit of PLC

Introduces basic soft units like relays, timers, and counters, explaining their core functions and usage.

3-2. Device’s ID List

3-5. Timer’s Number and Function [T]

3-6. Counter’s ID and Function [C]

4. Basic Program Instructions

4-1. List of Basic Instructions

4-2. LD, LDI, OUT Instructions

5. Applied Instructions

5-1. Applied Instruction List

5-2. Reading Method of Applied Instructions

5-3. Program Flow Instructions

5-4. Contactor’s Compare Instructions

6. Special Function Instructions (XC3/XC5)

6-1. High-speed Count

Explains high-speed counting functions, including modes, input ports, and count values.

6-2. Pulse Output

Details pulse output functions, types (single direction, dual pulse), and applications with PLSY, PLSF, PLSR.

6-3. Communication Function

Covers communication capabilities, COM ports (RS232, RS485, CAN), and parameters.

6-4. PWM Pulse Width Modulation

Explains PWM output for pulse width modulation, including parameters for duty cycle and frequency.