Thinget XC Series User Manual

Applied Instructions
ZRST M500 M559
D0 D100
D1· D2·
D1· D2·
X0
ZRST
MSET M10 M120
D1· D2·
X0
X1
RST M0
RST T0
RST D0
X2
K0FMOV D0 K100
Function & Action
Zone Set Unit M10~M120
Zone Reset Bit Unit M500~M559
。
Zone Reset Word Unit D0~D100
Other Reset
Instruction
Reset M0
Reset the current value and status of T0
Reset the current value and status of C0
Write K0 into D0~D99
z As soft unit’s separate reset instruction, RST instruction can be used
to bit unit Y, M, S and word unit T, C, D.
z As fill move for constant K0, 0 can be written into DX, DY, DM, DS,
T, C, D.
z Are specified as the same type of soft uni
When ＞ , only reset the soft unit specified in
ts, and ＜
D1·
D2·
D1·
D1·
D1·
D2·
D2·
[MSET]
16 bits instruction：MSET
32 bits instruction：-
Suitable Models：
XC1、XC3、XC5
Word
Device
Bit
Device
X Y M S T C Dn.m
D1·
D2·
D
FD
DM
DX
DY
DS
TD
CD
K/H
[ZRST]
16 bits instruction：ZRST
32 bits instruction：-
Suitable Models：
XC1、XC3、XC5
Word
Device
Bit
Device
X Y M S T C Dn.m
D1·
D2·
D
FD
DM
DX
DY
DS
TD
CD
K/H
D1·
D2·
87

Thinget XC Series Specifications

General

Brand	Thinget
Model	XC Series
Category	Controller
Language	English