Thinget XC Series User Manual

Special Functions
CAN Communication Setting
ID Function Description
FD8350 CAN communication mode 0 means not use；1 means interior protocol
FD8351 CAN baud rate Refer to CAN baud rate setting table
FD8352 Self’s CAN bureau ID CAN protocol using (the defaulted value is 1)
FD8354
Configured sending
frequency
The set value’s unit is ms (sending one time every
several ms)
Set to be 0 means sending every cycle, the defaulted
value is 5ms
FD8360 Read bit’s item
FD8361 Read word’s item
FD8362 Write bit’s item
FD8363 Write word’s item
-
FD8370 Far away node ID
FD8371 Far away node’s object ID
FD8372 The local object’s ID
FD8373 number
Item 1 configure
…… …… ……
FD9390 Far away node ID
FD9391 Far away node’s object ID
FD9392 Local object’s ID
FD9393 Number
Item 256 configure
27

Thinget XC Series Specifications

General

Brand	Thinget
Model	XC Series
Category	Controller
Language	English