Thinget XC Series - Input Mode of High Speed Counter’s Signal

Applied Instructions
209
3, About the high speed counters which don’t support four times frequency in AB phase
high speed counters, please refer to the following table:
z Input Mode of High Speed Counter’s Signal
1,
Input Mode
Increment Mode:
Under increment mode, input pulse signal, the count value increases with each pulse signal.
+1 +1 +1 +1 +1 +1 +1 +1
Pulse Input
ON
OFF
Increment Mode
Pulse+ Direction Input
Mode
AB Phase Mode
C600 C602 C604 C606 C608 C610 C612 C614 C616 C618 C620C622 C624 C626 C628 C630 C632 C634
X000 U U B
X001 Dir A
X002 U
X003 U
X004 U B
X005 U Dir A
XC3-14 PLC MODELS
Increment Mode
Pulse+ Direction Input
Mode
AB Phase Mode
C600 C602 C604 C606 C608 C610 C612 C614 C616 C618 C620C622 C624 C626 C628 C630 C632 C634
X000 U U B
X001 Dir A
X002
X003
U
XC5-32 PLC MODELS
PLC MODELS High speed counters without four times counter
XC3-14 C630
XC3-24/ XC3-32 C632
XC3 Series
XC3-48/ XC3-60 C630
XC5-32 -
XC5 Series
XC5-48/ XC5-60 C632