Thinget XC Series User Manual

Applied Instructions
z Connection of input terminal
The following, we take C600 as the example to introduce the connection format.
AB phase mode Pulse + Direction mode
COM
COM
X1
X0
X3
X2 X4
X5
X6
COM
COM
X1
X0
X3
X2 X4
X5
X6
Increment Mode
COM
COM
X1
X0
X3
X2 X4
X5
X6
z
Program Example
The following, we take XC3-60 PLC model as the example to tell how to program with the high
speed count:
RST C600
C600
RST C604
C604
M0
M1
M2
M3
K2000
D0(D1)
A phase input
B phase input
Pulse input
Direction input
Pulse input
z When M0 is ON, C600counts
with the OFF→ON from X000.
z When M1 activates, reset when
execute RST instruction.
z When M2 is ON, C604 starts to
count. The count input is X004,
In this example, the set value is
the content indirectly assigned in
the data register.
z See the graph, reset via M3 in the
sequential control program.
Increment Mode
211

Thinget XC Series Specifications

General

Brand	Thinget
Model	XC Series
Category	Controller
Language	English