Thinget XC3-48R-E - User Manual

Summary of XC series PLC
XC Series Programmable Controller
User's Manual
Xinje Electronic Co., Ltd.
1

Summary

Precautions

Summary of XC Series PLC

XC Series PLC Model and Type

Details on the different models and types available in the XC series.

Digital I;O Expansions

XC3 Series Performance

Power Specification

Input Specification

Output Specification

Relay Output Circuit Disposal

Transistor Output Circuit Disposal

Soft Unit Usage and Function

Timer Number and Function

Counter ID and Function

Basic Program Instructions

List of Basic Instructions

A comprehensive table of all basic SFC instructions with mnemonics and functions.

Pulse and Falling Edge Instructions

Set;Reset Instructions [SET];[RST]

Applied Instructions

Table of Applied Instructions

A summary table listing all applied instructions available for the XC series PLC.

Applied Instruction List

Program Flow Instructions

Data Compare Instructions

Data Move Instructions

Instructions for transferring data between different memory locations.

Program Flow Instructions

Condition Jump Instruction [CJ]

Subroutine Call and Return Instructions

Contactor Compare Instructions

Initial Comparison LD Instructions

Serial Comparison AND Instructions

Parallel Comparison OR Instructions

Data Move Instructions

Data Operation Instructions

ADD Instruction

Subtraction Instruction [SUB]

Multiplication Instruction [MUL]

Division Instruction [DIV]

Increment;Decrement Instructions [INC];[DEC]

Logic Operation Instructions [WAND];[WOR];[WXOR]

Shift Instructions

Logic Shift Instructions [LSL];[LSR]

Rotation Instructions [ROL];[ROR]

Data Convert Instructions

Integer to Float Convert Instructions [FLT];[FLTD]

Float to Integer Convert Instruction [INT]

Floating Point Operation Instructions

Float Zone Compare Instruction [EZCP]

Float Add Instruction [EADD]

Float Subtract Instruction [ESUB]

Float Multiply Instruction [EMUL]

Float Divide Instruction [EDIV]

Float Square Root Instruction [ESQR]

Clock Operation Instructions

Time Zone Compare Instruction [TZCP]

Time Add Instruction [TADD]

Time Subtract Instruction [TSUB]

Read RTC Data Instruction [TRD]

Set RTC Data Instruction [TWR]

Special Function Instructions

High-speed Count

Functions related to high-speed counting inputs and counter modes.

High-speed Count Function

Assignment of Count Input Ports

Table showing the number of high-speed counters available per mode for different PLC models.

Pulse + Direction Input Mode

AB Phase Mode

Counter Reset

Pulse Output Function

Single Direction Pulse Output without Speedup;Speed-down

PLSY Instruction

PLSF Instruction

One-Direction Pulse Output with Speedup;Speed-down

Pulse Output of Segments and Single Phase

Dual Pulse Output with Speedup;Speed-down

Communication Function

COM Port

Description of the COM ports (Port1, Port2) and CAN COM port on XC series PLCs.

RS232 COM Port

RS485 and CAN COM Port

Communication Parameter Setting

MODBUS Communication Function

MODBUS Communication Instructions

Single and Multi-Coil Write Instructions

Register Read Instructions

Register Write Instructions

Free Format Communication

Communication Mode and Data Format

Configuration for free format communication, including baud rate, data format, and symbols.

Free Format Communication Instruction Format

PWM Pulse Width Modulation

Frequency Testing

Frequency Testing Function and Action

Functionality for testing signal frequency and precision using different division choices.

Precise Time Function

Precise Time Interruption

How precise timers trigger interrupts and subroutine execution.

Interruption Function

External Interrupt

Configuration and definition of external interrupt ports and their associated tags.

Enable;Disable Interruption and Return Instructions

Time Interrupt Function

CAN-Bus Function (XC5 Series)

Register Read;Write Instructions

CAN Communication Settings

Applied Example Programs

Example of Pulse Output

Example of MODBUS Instructions

Sample program demonstrating Modbus communication between master and slave stations.

Example of Free Format Communication

Sample program for free format communication with DH107/DH108 instruments.

Thinget XC3-48R-E Specifications

General

Model	XC3-48R-E
Category	Controller
Digital Inputs	24
Power Supply	24VDC
Ports	1
Humidity	5% to 95% RH
Digital Outputs	24