41
6. Settings
You can set the product features according to your needs and preferences using the mobile viewer or the
PC viewer. The following procedures are based on the mobile viewer.
The product will stop recording while configuring settings on the mobile viewer.
6.1 Managing the memory card
6.1.1 Partitioning the memory card
You can partition the memory card to adjust the storage space for different types of video recordings. Refer
to the following instructions to partition the memory card.
1
From the mobile viewer, tap Dash Cam Settings
>
Memory Card Settings.
2
From Memory Partition, select the desired memory partition type. The new setting is applied
automatically.
6.1.2 Formatting the memory card
This menu allows you to format the memory card that is inserted in the product. Refer to the following
instructions to format the memory card.
1
From the mobile viewer, tap Dash Cam Settings
>
Memory Card Settings and tap the Format button
under Formatting Memory Card.
2
From Formatting Memory Card, tap OK to proceed with memory formatting. All the data stored on the
memory card will be erased after the formatting. Tap Cancel to cancel memory formatting.
6.1.3 Configuring the video overwriting function
This menu allows new video files to overwrite the oldest video files in the storage reserved for each mode.
1
From the mobile viewer, tap Dash Cam Settings
>
Memory Card Settings.
2
From Overwrite Videos, select the modes to allow video overwriting. The new setting is applied
automatically.
To Next Page
Loading...
