5.12 Device version
1. Press [SETUP] to enter the settings menu.
ð
The display shows the respective submenus.
2.
Press or to select the menu item ‘VER’ .
ð
The display shows the versions of the software operating the device.
3.
1 Shows the version of the internal sounds.
2 Shows the rmware version.
3 Shows the synthesizer version.
4 Shows the version of the detection algorithm.
5.13 Reset to factory default setting
1. Press [SETUP] to enter the settings menu.
ð
The display shows the respective submenus.
2.
Press or to select the menu item ‘RESET’ .
ð
The display shows ‘Press OK to reset’ .
3. Press [OK] to reset the device to the factory default settings without further
security query.
ð
The display shows ‘resetting...’ .
4. The device restarts and the display shows ‘welcome’ .
ð
The device is operational again.
Operating
NonaPad
31