5.3.1 Home display structure
1 Shows the number of the currently selected drum kit.
‘P1’ … ‘P30’ show the preset drum kits.
‘C1’ … ‘C20’ show the user drum kits that can be imported via a USB ash drive
(USB stick).
2 Indicates which tempo is set for the metronome.
3 Indicates that an eect is being used.
4 Indicates how hard the pad is played.
5 Indicates the name of the currently selected drum kit.
5.4 Selecting a sound
The sound you hear when you hit a pad is called a waveform. Any sound that you
sample or import from a USB ash drive or computer is saved as a waveform (WAVE).
These settings allow you to adjust individual samples within a preset.
1.
Press or to select the ‘WAVE’ menu.
ð
The display shows the respective submenus.
2. Press [SELECT] repeatedly to switch between submenus.
3. Use the rotary control or press [–/+] to change the respectively displayed value.
4. Press [OK] to conrm the new value.
ð
The display shows ‘Save successfully!’ .
Operating
sampling percussion pad
12
To Next Page
Loading...
Need help?
General
