5.14 Firmware
The current rmware list is available for download on the product page of our home‐
page www.thomann.de.
1. Save the downloaded rmware to a USB ash drive (USB stick). The percussion
pad automatically detects the rmware update during installation.
2. Connect the USB ash drive to the percussion pad via the [USB-A] interface.
3. Press [SETUP] to enter the settings menu.
ð
The display shows the respective submenus.
4.
Press or to select the menu item ‘UPDATE’ .
ð
The display shows ‘Press OK to rmware update’ .
5. Press [OK] to update the rmware.
6. The device restarts and the display shows ‘welcome’ .
ð
The device is operational again.
Operating
sampling percussion pad
32
To Next Page
Loading...
