thomann Millenium NonaPad User Manual

5.10.4 Display settings
1. Press [SETUP] to enter the settings menu.
ð
The display shows the respective submenus.
2.
Press or to select the menu item ‘DISP’ .
3. Press [SELECT] repeatedly to switch between submenus.
1 Shows the display's contrast.
Use the rotary control or press [–/+] to set the display contrast between
‘0’ and ‘20’ . Conrm the selection with [OK].
2 Shows the behaviour of the LEDs below the pads.
Use the rotary control or press [–/+] to set the LEDs' behaviour.
‘o’ : The LEDs below the pads do not light up when the pads are played.
Conrm the selection with [OK].
‘type1’ : The LEDs below the pads light up for 0.5 seconds when the pads
are played. Conrm the selection with [OK].
‘type2’ : The LEDs below the pads light up immediately when the pads
are played. Conrm the selection with [OK].
ð
The display shows ‘Save successfully!’ .
5.11 Using a USB Flash drive (USB stick)
The Percussion Pad detects USB ash drives (USB stick) that are in the exFAT, FAT32
or FAT format and are not partitioned. We recommend formatting the USB ash drive
(USB stick) before using it with the percussion pad.
#
ö
Operating
sampling percussion pad
26

thomann Millenium NonaPad Specifications

General

Brand	thomann
Model	Millenium NonaPad
Category	Music Mixer
Language	English