thomann Sirus MP2 - Controls and Connections; Front Panel Controls Identification

To Next Page

To Previous Page

5 Connections and operating elements

1 [POWER] Main switch to turn the device on and o

2 [MAIN VOLUME] Rotary control for adjusting the volume

3 [MODE] Button for mode selection

4 Skip back to the previous track / page

Start or resume playback / pause

Skip to the next track. Keep pressed for scanning / fast forward

5 [MENU] Opens the menu of the currently set mode

6 Display

7 [STAND BY] Activates or deactivates the standby mode (display of time and date). Turns the sleep function

o.

[PRESET] Calls up preset stations or stores stations in memory locations.

Hold down [PRESET] until the display shows ‘Save preset’ . Select one of the 10 memory loca‐

tions to save the radio station currently being played.

Briey press [PRESET] and then select one of the listed radio stations. If a stored radio station is

played, the display below shows the memory location (display shows ‘P1’ … ‘P10’ ).

There are 10 memory locations each for Internet radio, DAB and FM.

[ALARM] Activates the alarm, turns the alarm o when it sounds, and toggles between the two alarms

in standby.

[SLEEP] At playback: Switches to standby after the set duration.

When the alarm sounds: switches to snooze for an set duration.

Front panel

Connections and operating elements

MP2