thomann Sirus MP2 - FM Radio Playback Information Display; Aux-in Mode Operation Guide; Alarms and Sleep Timer Functions

7.4.3 Settings
By default, the FM search stops at every available station. In this way, stations with
weak signals can also be selected.
Select ‘Scan setting > Strong stations only? > Yes ’ if you want the scan to stop
for stations with good signal strength only.
By default, stereo stations are played in stereo. With weak signal stations, the play‐
back in stereo can be very noisy.
Select ‘Audio setting > FM weak reception: Listen in mono only > Yes ’ if you want
signal weak stations to be played in mono.
7.5 Aux-in mode
In Aux-in mode, the device can receive audio data from an external source, e.g. an
MP3 player.
1. Turn the volume on the device and, if possible, on the external audio source to
minimum.
2. Connect the external audio source via the 3.5 mm mini jack socket.
3. Call up the Aux-in mode with [MODE] or via the ‘Aux in’ menu.
4. Adjust the volume as required on the device and, if possible, on the external
audio source.
7.6 Alarms and Sleep
Two independent alarms with snooze function can be set. There is also a sleep func‐
tion to switch o the device after a set period.
Search settings
Audio settings
Operating
media player
28