thomann Sirus MP2 - Alarm Configuration Details; Sleep Timer Configuration Steps; Operating the Device via Mobile App

7.6.1 Alarms
1. Select ‘Alarms’ to setup or change the alarms.
2. Select the alarm number ( ‘1’ or ‘2’ ) and set the following parameters:
Menu item Options Meaning
‘Enable’ ‘on’ / ‘o’ Enables or disables the alarm
‘Frequency’ ‘Daily’ / ‘Once’ /
‘Weekends’ /
‘Weekdays’
Sets the alarm to repeat (daily, once,
on weekends, on weekdays)
‘Time’ Sets the alarm time
‘Mode’ ‘Buzzer’ / ‘Internet
radio’ / ‘DAB’ / ‘FM’
Sets the alarm tone (beeper, internet
radio, DAB radio, FM radio)
‘Preset’ ‘Last listened’ / ‘1’ …
‘10’
Selects the preset (last heard,
memory locations ‘1’ … ‘10’ )
‘Volume’ ‘0’ … ‘20’ Sets the alarm sound volume
3. Conrm the settings with ‘Save’ at the bottom of the display.
ð
The display indicates the active alarms with a bell symbol at the bottom
left.
4. If the alarm sounds at the set time, you can switch it o temporarily with
[SLEEP]. You can change the snooze time with [CONTROL SELECT] .
ð
The device turns to standby again for the specied duration, with the
alarm symbol ashing.
7.6.2 Sleep
Select ‘Sleep’ and then ‘Sleep OFF’ , ‘15 MINS’ , ‘30 MINS’ , ‘45 MINS’ or ‘60 MINS’
to setup the Sleep timer.
ð
The device returns to the main menu.
7.7 Operating via app
You can also operate the device using the "UNDOK" app for mobile devices with
Android or iOS. The app is available in the Apple® AppStore and in the Google® Play
Store.
The app instructions are available for download on the product page of our home‐
page
www.thomann.de.
Operating
MP2
29