EasyManua.ls Logo

THOMSON THT709 - Your Receiver; Default PIN Code; Front Panel Overview; Rear Panel Connections

THOMSON THT709
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
5
STRONG cannot guarantee the playback of all les although extensions are listed, as it depends on le
size, codec, bit rate and resolution.
2.0 YOUR RECEIVER
2.1 PIN-CODE DEFAULT: 1234
2.2 Front Panel
Fig. 1
1. Mode indicator: RED indicates that the receiver is in STAND-BY mode.
GREEN indicates that the receiver is in OPERATING mode.
2. IR sensor: Point your remote control towards this sensor.
3. USB: Connector for USB devices.
2.3 Rear Panel
Fig. 2
1. RF IN To connect to your antenna for the reception of broadcast signal.
2. S/PDIF Coaxial To connect your receiver to a digital audio amplier.
3. HDMI To connect your receiver with your TV set using a HDMI cable.
4. LAN To connect your receiver to Ethernet LAN
5. TV SCART To connect your receiver with your TV set using a SCART cable.
6. Power Cord Your receiver requires a voltage of 220~240 V AC (Auto-selectable),
50/60 Hz +/-5%. Check the local power specication before
connecting your receiver to the wall outlet.
2.4 Remote Control
Fig. 3
1. q Turns the receiver On/Standby
2. INFO Shows the actual channel information
3. SLEEP Press SLEEP repeatedly to select an automatic switch off time
4. ! Mutes audio output of the receiver
5. AUDIO Sets the current audio channel to left, right or stereo
6. SUB Shows list of subtitled languages
7. PG+/PG- Page up/down and 10 channels steps in channel list mode
8. EPG Shows the EPG (Electronic Programme Guide) in TV mode
9. TEXT Shows Teletext on OSD (On Screen Display)
10. MENU Opens the main menu. In menu you will get one step back
11. EXIT Exits from the menu or sub-menu
12. pq Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
13. t u Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specic Menus
14. OK Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
15. GOTO While in playback, select a time to jump to.
16. FAV Favourite group selection
17. TV/R Toggles between TV or RADIO mode
18. RECALL Back to previous shown channel, in menu, one step back.
19. 0~9 Channel selection or value input
20. 4 Records the TV programme to the connected storage device
21. u Start playback in Multimedia, Start Playback of Timeshift
22. 2/TIMESHIFT Activates the Timeshift function
23. 5 6 Fast rewind/Fast forward
24. 7 8 Previous/Next item in Multimedia.

Related product manuals