APPENDIX “B”
THOMSON POWER SYSTEMS
©
TS 870 SYSTEM VOLTAGE CHANGE
PROCEDURE
9087A - 198th Street, Langley, BC, Canada V1M 3B1 · Telephone (604) 888-0110
Email: info@thomsonps.com · www.thomsonps.com
2. Once successfully logged in, From the TSC 900 DISPLAY Home Page, Navigate to the
Settings Page below and select System Voltage as shown below.
3. On the System Voltage Row, select the underlined System Voltage value and from the drop
down list which appears, select the desired voltage for the application as shown below. To
confirm the change, press the Apply button.
To Next Page
Loading...
