What to do if foods over-cooked or under-cooked in Thor Kitchen HRG4802U oven?
If foods are overcooked or undercooked in your Thor Kitchen Ranges oven, the cooking time or temperature may be incorrect. Adjust the time, temperature, or rack position accordingly.
What should I do if there is a power failure and I want to use my Thor Kitchen Ranges oven?
If there is a power failure, your Thor Kitchen Ranges oven cannot be used until power is restored.
What to do if my Thor Kitchen HRG4802U Ranges flames have suddenly gone out?
If the flames on your Thor Kitchen Ranges have suddenly gone out, a draft or spill may have extinguished them. The burner will detect this and automatically relight. If there has been a large spill, turn the burners off and clean the burners and sump area.
Why are my Thor Kitchen Ranges burner flames very large and yellow?
Large, yellow burner flames on your Thor Kitchen Ranges usually indicate that the burner bezel ports are clogged, burner ports or caps are not correctly positioned, the cooktop is using the wrong gas type, or the regulator is faulty or incorrectly set. Try cleaning the burner bezel ring ports with a straightened paper clip, needle, or wire. Also, remove and carefully reinstall the burner bezel and caps. Ensure the cooktop matches the natural gas supply, and check the regulator installation, replace it if necessary, or set it for the proper gas type.
What to do if my Thor Kitchen HRG4802U oven will not heat?
If your Thor Kitchen Ranges oven will not heat, the oven settings may not be correct. Follow the mode selection and clock settings as specified in the Oven Operation section of the manual.
What to do if igniters spark continuously after flame ignition in Thor Kitchen HRG4802U?
If the igniters in your Thor Kitchen Ranges spark continuously after the flame ignites, the power supply polarity may be reversed, or the igniters may be wet or dirty. Correct the polarity or dry/clean the igniters.
Why won't my Thor Kitchen HRG4802U Ranges burners light?
If some of the burners on your Thor Kitchen Ranges won't light, the burner parts or igniters may be wet, dirty, or misaligned. Ensure that the burner parts and igniters are clean, dry, and correctly assembled.
What to do if my Thor Kitchen HRG4802U Ranges oven doesn’t work (no heating)?
If your Thor Kitchen Ranges oven isn’t heating up, check that the circuit breaker hasn’t tripped and that there is no power outage in your area. If there is a power outage, the oven cannot be used until power has been restored. For gas ovens, contact your local gas supplier to ensure there is a gas supply.
How to fix Thor Kitchen HRG4802U burners that will not light?
If some burners on your Thor Kitchen Ranges won't light or the flames don't burn all around the burner cap, it's possible the burner parts or igniters are wet, dirty, or misaligned. Ensure the burner parts and igniters are clean, dry, and correctly assembled. Refer to the ‘Care and cleaning’ section for detailed instructions.
What to do if Thor Kitchen HRG4802U has sparking but no flame ignition?
If your Thor Kitchen Ranges is sparking but the flame won't ignite, the gas shut-off valve might be in the ‘OFF’ position. Turn the shut-off valve to the ‘ON’ position to allow gas flow.
General| Brand | Thor Kitchen |
|---|---|
| Model | HRG4802U |
| Category | Ranges |
| Language | English |
To Next Page
