EasyManua.ls Logo

Thor Kitchen HRG4802U - User Manual

Thor Kitchen HRG4802U
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
All Models
HRG PROFESSIONAL GAS RANGE

Table of Contents

Other manuals for Thor Kitchen HRG4802U

Questions and Answers

  • A
    Alec LeAug 28, 2025
    What to do if my Thor Kitchen Ranges burner flame goes out at low setting?
    • J
      johnstonmichaelAug 28, 2025
      If the burner flame on your Thor Kitchen Ranges goes out at a low setting, it could be due to low gas supply pressure or obstructed air intake holes around the knobs. Contact your gas company to check the gas supply pressure. Also, remove any obstructions around the air intake holes near the knobs.
  • V
    Vanessa BoydAug 27, 2025
    What to do if Thor Kitchen HRG4802U Ranges igniters spark continuously after flame ignition?
    • S
      shannon45Aug 27, 2025
      Continuous sparking after flame ignition in your Thor Kitchen Ranges suggests a reversed power supply polarity or wet/dirty igniters. To resolve this, have the polarity corrected and dry or clean the igniters.
  • M
    Melissa HillAug 27, 2025
    What to do if there is a power failure and I want to use my Thor Kitchen HRG4802U oven?
    • M
      mark47Aug 27, 2025
      The oven cannot be used until power is restored if there is a power outage in your home or neighborhood.
  • J
    Jocelyn CastroAug 25, 2025
    What to do if there is a power failure and I want to use my Thor Kitchen HRG4802U cooktop burners?
    • T
      Theresa CruzAug 26, 2025
      Yes, the cooktop burners can still be used during a power failure. To light them manually: Hold a lighted match to the flame spreader, push in on the control knob and turn counterclockwise to LITE. When the flame is burning all the way around the burner, you may adjust the heat. Important! If the flame is blown out during a power failure, turn the knob immediately to OFF, as the burner will not automatically relight and gas may escape.
  • S
    Samantha WestAug 25, 2025
    What to do if my Thor Kitchen HRG4802U Ranges burners have very large and yellow flames?
    • M
      Miss Jennifer Rogers MDAug 25, 2025
      If the burner flames on your Thor Kitchen Ranges are very large and yellow, the burner bezel ports may be clogged, burner ports or burner caps might not be positioned properly, the cooktop may be using the wrong type of gas, or the regulator could be faulty or set incorrectly. Try cleaning the burner bezel ring ports with a straightened paper clip, needle, or wire. Also, remove and carefully reinstall the burner bezel and caps. Ensure the cooktop matches the natural gas supply. Check the installation, replace the regulator, or set the regulator for the proper gas.

Thor Kitchen HRG4802U Specifications

General IconGeneral
BrandThor Kitchen
ModelHRG4802U
CategoryRanges
LanguageEnglish

Related product manuals