29BASIC OPERATION
Basic operation
Playing records
Remove the protective cap from the cartridge stylus before using the turntable.
1. Press the STANDBY/ON button on the back of the unit to turn it on.
2. Open the dust cover slowly.
Be careful not to pinch your hand, for example, when opening and closing the dust cover.
3. Place a record on the platter.
When playing a 45 RPM large-hole single record, use the included adapter.
4. Turn the record size selection lever to select the record size.
5. Select the rotation speed indicated on the record.
The rotation speed can be set to 33 RPM or 45 RPM.
6. Press the START button to start playback.
The platter begins to turn, the tonearm moves to the outer edge of the record, the stylus lowers to the
record, and playback begins. This playback operation cannot be stopped in the middle.
Do not place anything on top of the dust cover.
ATTENTION
During playback, do not touch the tonearm or the record. Doing so could damage the stylus tip and cause
scratches on the record.
Do not forcibly stop platter rotation during playback. Since this product is not a turntable designed for DJs
(direct drive), doing something like this could cause malfunction.
During record playback, feedback could occur if the volume is too loud. If this happens, lower the volume of
the amplifier.
To Next Page
Loading...
Need help?
General
