31SPECIFICATIONS
Turntable section
Drive System Belt Drive
Motor DC Motor
Speed 33 1/3 RPM, 45 RPM
Rotation Speed Variation ±2%
Wow and Flutter 0.2%
Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter Aluminum Die-cast
Diameter of Platter 300mm
Tonearm section Carbon tube
Type Balance
Eective Arm Length 214.5mm
Tracking force 2g
Overhang 19.5mm
Cartridge section
Type VM type (Audio-Technica AT-VM95E)
Output Voltage 4.0mv ±3db
Tracking force 2.0g ±0.5g
Cartridge Weight 6.1g ±0.2g
Power AC 100 to 240V, 50/60Hz
Power Consumption Less than 0.5W at Standby
Overall Dimensions (dust cover included) (W x D x H) 420 x 138.6 x 355mm
Weight (dust cover included) Approx. 4,8 kg
To Next Page
Loading...
Need help?
General
