THORENS TD 146 User Manual

Figure 8
Amplifiers with a 5
pin DIN input
connector require
an adapter cable
(RCA female to
DIN male),
available at your
dealer.
If hum should be
heard in the
loudspeakers when
the turntable is in
use, check that the
cartridge wand is
firmly attached to
the bearing
assembly and that
the connections to
the pickup
cartridge are
secure. Hum may
also be produced
by the close
proximity of
amplifiers or other
appliances. Your
THORENS dealer
or service
representative
should be
consulted if hum-
free performance
cannot be achieved.
One should avoid a
position such as
shown in Figure 9.
When connecting
the turntable to
other hi-fi
equipment, care

THORENS TD 146 Specifications

General

Drive System	Belt drive
Speeds	33 1/3, 45 RPM
Platter	Aluminum die-cast
Tonearm	TP 16
Automatic Function	Semi-automatic
Effective length	230 mm
Effective mass	16.5 g
Overhang	15 mm
Wow and flutter	0.05%
Motor	16-pole synchronous motor