Tandberg Programmable Tuner TPT 3011
Technical Data
Power requirements: 230/115 V +/- 10%, 50/60 Hz
Power consumption: 23 W
Dimensions:
Width: 17 1/8" (43.5 cm)
Depth: 13 3/4" (35.0 cm)
Height: 3 1/4" (8.3 cm)
Weight: 12.6 lbs (5.8 kg)
Technical Data according to IHF-T-200, 1975
Tuning range: 87.5 - 108 MHz
Usable sensitivity: Mono: 0.85 microvolts/75 ohms
50 dB quieting sensitivity: Mono: 1.5 microvolts/75 ohms, Stereo: 20.0 microvolts/75 ohms
Signal to noise ratio: Mono: 78 dB, Stereo: 75 dB
Muting threshold: 8 microvolts/75 ohms
Muting hysteresis: 6 dB
Stereo threshold: 7.5 microvolts/75 ohms
Stereo hysteresis: 8 dB
Frequency response 30 Hz to 15 kHz: Mono: +0.5 dB -1 dB, Stereo:+0.5 dB -1 dB
Distortion at 50 dB quieting: Mono: 0.3%, Stereo: 0.3%
Distortion at 65 dBf
(0.5 mV/75 ohms at 1 kHz):
Mono: 0.2%, Stereo: 0.3%
Distortion at 65 dBf
(30 Hz to 15 kHz):
Mono: 0.3%, Stereo: 0.4%
Intermodulation distortion: Mono: 0.2%, Stereo: 0.2%
Capture ratio, selectively measured: 0.9 dB
Adjacent channel selectivity, +/- 200 kHz: 14 dB
Alternate channel selectivity, +/- 400 kHz: > 100 dB
Spurious response ratio: > 70 dB
Image response ratio, balanced: > 95 dB
RF intermodulation: > 70 dB
AM suppression raio: > 70 dB
Stereo separation
(60 Hz to 10 kHz, selectively measured):
> 40 dB
Subcarrier product ratio: 60 dB
19 kHz suppression: 70 dB
38 kHz suppression: 60 dB
Dynamic range of signal meter: 0.5 microvolts - 100 microvolts/75 ohms
Technical Data according to DIN 45301 and DIN 45500
To Next Page
Loading...
