THORENS TD-150 - Cartridge connections; Pick-up output connections

0
ing screws supplied with US cartridges are for US standards and will not fit the metric threads used
‘on Thorens units.)
The cartridge height on the plug-in shell should be chosen in order to bring the stylus tip at a dis-
tance of 34" to 71° (19 to 22 mm) from the bottom of the shell. If necessary, make use of the furnished
spacers.
Fig.6. Wiring diagram for pick-up
output.
© Cartridge connections
Four separate colour coded leads are already soldered to the
terminal pins in the shell:
Red
—
—
Right
channet
positive
(hot)
ive
(shield)
These
two
leads
constitute
also
the
normal
mono
channel,
een — Right channel nei
White
—
Left
channel
positive
(hot)
Blue
—
Left
channel
negative
(shield).
©
Pick-up
output
connections
The
TD-150
AB
and
A
models
are
wired
at
the
factory
accord-
ing
to
Fig.
6.
Right channel: standard male phonoconnector plug, black
colour.
Left channel: standard mal
colour.
phonoconnector plug, white