THORENS TD-150 - I. Unpacking of the TD-150 AB and B turntables

1,
Unpacking
of
the
TD-150
AB
and
B
turntables
@ You have already placed the carton top-side
up and opened.
© Take care that this manual, and template
S 800-560 for models TD-150 and TD-150 A,
are not misplaced.
© Remove corrugated spacers A, 8, C. Box D
contains the accessories delivered with the
unit,
© Remove the four lateral corrugated spacers
E.
© Take the complete unit out of the box. The
power cord and the pick-up leads are thread-
ed through holes in spacers F and G.
@
Remove
spacers
F
and
G
and
take
the
outer
turntable
platter
out
of
the
box.
Leave the corrugated spacer H in position,
between the inner turntable platter and the
unit plate, until the TD-150 is completely
installed for maximum protection of turn-
table main shaft and unit pla
To
remove
corrugated
spacer
H,
lift
the
inner
turntable
platter
until
the
spacer
may
be
care-
fully
shifted
from
the
unit
plate.
Fig. 2. Packing of the TD-150 AB and TD-150 B turntables.