EXULUS-HD1 & EXULUS-4K1 Spatial Light Modulators Chapter 2: Safety
Page 2 CTN008794-D02
Chapter 2 Safety
DO NOT OPEN HOUSING
Except for the main fuse, which is accessible from the outside of the housing, Thorlabs’ SLM has no
user-serviceable parts. Service should only be performed by trained service personnel.
SHOCK WARNING
High voltage inside. To avoid electrical shock, before powering up, make sure that the ground pin of
the power cord is correctly connected to the ground connector in the power socket. Improper
grounding can cause electric shock resulting in severe injury or even death. Do not operate without
the cover installed.
WARNING
This unit must not be operated in explosive environments.
WARNING
Transportation and delivery may cause the SLM to be warm or cool upon receipt. Please wait for the
whole device to reach room temperature before attempting to operate.
WARNING
Do not operate in wet/damp conditions. Do not obstruct the air ventilation slots in the housing!
To Next Page
Loading...
