To Next PageTo Next PageWhy my THRILL Accessories device does not work?
If your THRILL Accessories device isn't working, first ensure the battery is charged. Next, check that the manual valve on the cylinder is open. Finally, verify that the power button is in the ON position.
What to do if splashes of liquid appear when gas activated on THRILL Accessories?
If you see splashes of liquid when the gas is activated on your THRILL Accessories, it indicates the presence of liquid on the tray. You should dry out the drip tray.
What to do if no gas is released when pressing glass on rosette wheel of THRILL VORTEX F1-PRO Accessories?
If no gas is released when pressing the glass on the rosette wheel of your THRILL Accessories, it may be due to a crushed or flattened tube between the appliance and the cylinder, or because the gas cylinder is empty. Check these issues.
Why is there dry ice on the surface of the glass of my THRILL VORTEX F1-PRO?
Dry ice appearing on the surface of the glass of your THRILL Accessories can be caused by a manual valve being partially open or humidity in the air.
What to do if splashes of liquid appear when gas activated in THRILL VORTEX F1-PRO Accessories?
If you notice splashes of liquid when the gas is activated in your THRILL Accessories device, it's likely due to liquid on the tray. To resolve this, dry out the drip tray.
General| Brand | THRILL |
|---|---|
| Model | VORTEX F1-PRO |
| Category | Accessories |
| Language | English |
Step-by-step guide to initiate machine operation and first use procedures.
Explains safety symbols and general hazard warnings associated with appliance use.
Outlines specific dangers related to children, disabilities, and power supply hazards.
Lists detailed technical features, dimensions, operating parameters, and power requirements.
Detailed procedure for sanitizing, chilling, or freezing glassware using the appliance.
Checklist of common faults and their potential causes and solutions for user-resolved issues.
