16
This document is the property of THRILL INTERNATIONAL and may not be reproduced without the company’s prior consent.
6.3. TROUBLESHOOTING
In the event that the appliance fails to function properly, rst consult the checklist below, as
it could just be a minor problem that the user can resolve by himself.
DANGER! Never attempt to repair the appliance yourself.
Important: should it become apparent that gas is leaking from the nozzle of the appliance even
when idle, stop use immediately and contact Thrill International to arrange for the appliance to
be sent to its laboratory in order to carry out any necessary maintenance and repairs.
7. VORTEX SBI APPLIANCE
7.1. APPLIANCE DESCRIPTION
The Vortex SBI appliance, the built-in version of the Vortex F1 Pro model and diers in that it is
designed to be installed and tted directly to work tops, making it readily accessible and part of
the work top or dispensing point.
FAULTS POSSIBLE CAUSES/SOLUTIONS
The device does not work Check that the battery is charged
Check that the manual valve on the cylinder is open
Check the power button in the ON position
Presence of dry ice on the surface
of the glass
Manual valve partially open
Humidity in the air
No gas is released when pressing
glass on rosette wheel
Check that the tube between the appliance
and the cylinder is not crushed or attened
Gas cylinder empty
Splashes of liquid appear when gas
activated
Presence of liquid on the tray
Dry out the drip tray
Gas leakage from the machine Stop using the machine
Position of the on/o button
for the activation of the appliance
To Next Page
Loading...