27
TOPSIDE CONTROL INSTRUCTIONS
Jets 2 Button: The jets 2 button will operate pump number 2.
First press of the Jets 2 button will activate pump 2. A second
press of the Jets 2 button will deactivate pump 2. If pump 2 is not
manually turned off by pressing the Jets 2 button, pump will automati-
cally timeout after 15 minutes.
Jets 3 Button: (If your TidalFit is equipped with a third pump.)
The jets 3 button will operate pump number 3. First press of
the Jets 3 button will activate pump 3. A second press of the
Jets 3 button will deactivate pump 3. If pump 3 is not manually
turned off by pressing the Jets 3 button, pump will automatically timeout
after 15 minutes.
Light Button: The light button operates the L.E.D. Lights. First
Press of the light button will turn on the lights. A second press of
the light button will turn the lights off. The TidalFit lighting
systems have different modes. To cycle through the different
modes you must turn the light on and off, once the desired mode is
selected, leave the light on. If the light is not manually turned off it will
automatically timeout after 240 minutes.
Use the navigation buttons to highlight the operation you would like to
perform.
Once the operation is highlighted press the Select Button,
to engage the highlighted item.
Back button: Will return you to the main menu.
Use the Right Arrow Button and highlight SPA in the menu.
Use the Down Arrow Button and highlight Short cuts in the menu.
To Next Page
Loading...
