TOPSIDE CONTROL INSTRUCTIONS
REMINDER MESSAGES
Check the pH
May appear on a regular schedule, i.e. every 7 days. Check pH with a test
kit and adjust pH with the appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days. Check sanitizer level
and other water chemistry with a test kit and adjust with the appropriate
chemicals.
Clean the lter
May appear on a regular schedule, i.e. every 30 days. Clean the lter
media as instructed by the manufacturer.
Test the GFCI (or RCD)
May appear on a regular schedule, i.e. every 30 days. The GFCI or RCD is
an important safety device and must be tested on a regular basis to verify
its reliability. Every user should be trained to safely test the GFCI or RCD
associated with the hot tub installation.
Change the water
May appear on a regular schedule, i.e. every 90 days. Change the water in
the spa on regular basis to maintain proper chemical balance and sanitary
conditions.
Clean the cover
May appear on a regular schedule, i.e. every 180 days. Vinyl covers
should be cleaned and conditioned for maximum life.
Change the lter
May appear on a regular schedule, i.e. every 365 days. Filters should be
replaced occasionally to maintain proper spa function and sanitary condi-
tion.
46
To Next Page
Loading...
