51
DIAGNOSTIC MESSAGES
Hardware failure.
• Contact your dealer or service organization if
message appears on more than one power up.
Firmware install problem.
• Contact your dealer or service organization if
message appears on more than one power up.
Conguration error. Pool cannot start up
• Contact your dealer or service organization.
Pool could not trip GFCI.
• Contact your dealer or service organization .
Continued operation may be unsafe.
A pump appears to be stuck on, causing the wa-
ter temperature to creep up, possibly to hazard-
ous levels.
• POWER DOWN POOL IMMEDIATELY. DO
NOT ENTER THE WATER. contact your
dealer or service organization.
A pump appears to have been stuck on the last
time spa was powered.
• POWER DOWN POOL IMMEDIATELY. DO
NOT ENTER THE WATER. Contact your
dealer or service organization.
(Press the “Mode” button to reset a displayed reminder.*)
To Next Page
Loading...
