5. Press blue colour key to pop up the Add/Delete
window. The same operation as the above Edit
Satellite window
6. Press blue colour key and select delete, it will
pop up the dialogue "Are you sure to delete?".
Select Yes button and press OK key to delete the
selected satellite. You can cancel this operation by
pressing OK key at the NO button.
Suppose that you have selected Fixed Antenna in the
Antenna Connection window.
1. Satellite: All selected satellites in the satellite list are
displayed in this item.
Press keys to select the satellite in circle. Or
press OK key to pop up the drop-down list, then select
the desired satellite in the list and press OK key to
confirm.
Antenna Setup
Part A: Fixed
3. 22K, Polarity: You can press keys to select in circle.
Part B: Motor
Suppose that you have selected Motor Antenna in
the Antenna Connection window.
1. LNB Type: Select the proper LNB type.
2. Motor Type: Select between DiSEqC1.2 and
USALS. If you select DiSEqC1.2, the following
Local Longitude and Local Latitude items will turn
grey.
3. Delete All: Press OK key to pop up the dialogue
"Are you sure to clear set satellite position of this
tuner?". Press OK key at the Yes button to clear all
the memories about the position of the satellites
that are connected to the current tuner.
2. LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above.
To Next Page
Loading...
General