2. Timer Service: Select between Channel or
Record.
3. Wakeup Channel: Press key to select
channel
3. Wakeup Date, On Time: Use numeric keys to
input the valid date.
Duration: Set the gap time. After waking up, system will power off automatically
after the duration time.
3.6 Timer Setting
If there is no program, you can not enter into this
window. There are 8 timers that can be set.
Select Timer up or down, and press OK key to
enter into the setting window.
1. Timer mode: The default mode is off. You can
set the timer once and daily.
Before entering into the Parental Lock window, you
need input the correct password. The default
password is 0000.
1. Menu Lock: Press keys to select between
Off and On. If select "On" , you can not enter into the
window before entering the password.
2. Channel Lock: Press keys to select
between Off and On. The default value is On.
3.7 Parental Lock
If select "On", you can not view the locked channel set in Chanel List Edit window until
you have inputted the correct password.
3. New Password: Use numeric key (0-9) to input the new password.
4. Confirm Password: Input the new password once again. Confirm password must be
the same as the New password. System will inform you "Change password successfully!"
while they are the same, or inform you to input the password of Confirm password once
again when they are not the same.
3.8 OSD Setting
1. OSD Timeout: Press keys to select from
1 to 10 by step1. The default values is 5.
2. OSD Transparency: Press keys to select
among Off, 10%, 20%, 30%, 40%. The default
option is Off.
Press MENU or EXIT key to save and exit.
To Next Page
Loading...
General