14
Cleaning and Maintenance
Parts to wash when dirty Detaching and installing the inner lid
Caution
Do not splash water on the main unit, immerse the
main unit in water or put water inside the main unit.
Do not use if dust or other materials are clogging
the intake and exhaust vents on the bottom of the
main unit.
This causes the temperature inside the main unit to
rise, leading to damage or a fire.
Caution
Do not pull on the lid gasket or the inner lid gasket.
If they come off, they cannot be put back on. If the
lid gasket or inner lid gasket comes off, consult the
store where you purchased your rice cooker.
Detach the inner lid
Installing the inner lid
Wipe with a dry cloth.
① Insert.
② Press until you
hear a "click."
Remove.
Lift.
・ Wipe with a well-wrung-out cloth.
・ Remove any burnt rice from the heating coil or the
center sensor.
・ Remove any burned rice, uncooked rice, or other
matter from the upper casing and around the hook
button or inner lid-release button.
Hook button
Center sensor
Heatsink
Lid
Upper
casing
Steam vent lid
sensor gasket
Inner lid release button
Inner lid release
button
When putting in the steam lid sensor gasket, make
sure that it is facing in the correct direction and
insert it all the way in. (See illustration.)
Inserting it in the wrong direction can cause steam
leaks and other problems.
Steam lid sensor
gasket
Inner lid gasket
Inner lid
gasket
Steam lid sensor gasket
Inner lidInner lid gasket
The steam lid sensor
gasket is inserted
backwards.
Air intake
Air exhaust
Use a cotton swab or similar item to remove dirt.
Air intake・Air exhaust
Main unit
plug
Power plug
Power cord
Outer lid
gasket
Lid
Inner lid
Inner lid
gasket
How to detach and attach the steam cap.
①
②
Cap lid
Flange
Cap lid
1
Detach the inner lid. →P.43
2
Hold the cap lid flange with your fingers
and pull to remove.
3
Turn the cap lid counter-clockwise and
detach it.
Power cord
Power plug
plug
Detach the inner lid
To Next Page
Loading...
Need help?
General
