33
32
33
English
Detaching/attaching the inner lid
How to detach
Pull up the inner lid release button and
detach the inner lid toward you.
How to attach
Set the right and left tabs of the inner lid in the
slots securely.
Note
● Do not pull on the lid gasket or inner lid gasket.
Once it is detached, it cannot be reattached.
If the lid gasket or inner lid gasket comes off, consult your
dealer.
Attaching the gasket for depressurization
• Be sure to attach it in
the correct direction.
Otherwise rice may not
be cooked well.
• If the gasket for
depressurization
is hard to attach,
moisten it with a little
water for smooth
attachment.
Inner lid release button
(1) Pull up
(2) Detach
(1) Insert (2) Push in until it clicks
Tab
Slot
Inner lid gasket
Inner lid
Lid
Lid gasket
Do not remove the gaskets.
Do not press or pull them
forcibly. Doing so may cause
steam leak or stuck external
lid resulting in failure.
Front side
Gasket for depressurization
Insert
Gasket for depressurization
Pull
Removing and attaching the steam cap
Removing the steam cap
1
Insert your ngers into the
opening of the lid and pull up
the steam cap to remove it.
Steam cap
2
Turn over the steam cap and
remove the cap body as shown
in the gure.
(2)Open
(1)Press
Cap body
(3)
Detach
Attaching the steam cap
1
Fit and engage the cap body to
the cap lid.
Cap body
Cap lid
(1)Fit
(1)
2
Push in until it clicks.
Tab
(2) Push in until it
clicks.
3
Attach it to the rice cooker
securely.
Installing the steam cap gaskets
Carefully set the gasket in place as shown in the
gure. If it is not tting well, it may come off or
cause steam leak resulting in failure.
Note
● Do not detach the ring gasket.
If it has come off, attach it as it was.
● If the gasket is hard to attach, moisten it with a
little water for smooth attachment.
Gasket
Set in
Cap body
Ring gasket
To Next Page
Loading...
Need help?
General
