c. COUNTDOWN
• When the countdown reaches zero, the alarm
sounds for about 60 seconds and press any button
to break it.
Countdown Timer Setting
1. In the countdown mode, press
“A” the hour to flash (flashing
indicated in set mode).
2. Press “D” to increase the hour,
press and hold to increase at high
speed.
3. Press “B” change to the next
selection.
Use Countdown Timer
1. Press “D” to start the
countdown.
2. To pause the countdown by
pressing “D” again.
4. Press “D” to increase the
number, press and hold to
change at high speed.
5. Repeat step 3 and 4, the selection in the
following sequence:
Hour Minutes Seconds.
6. Press “A” to exit the set
state, after you set.
To Next Page
Loading...
