a. TIMEKEEPING
12/24H Format
• In the timekeeping mode, press “A”
to switch between 12/24H formats.
Calendar
• In the timekeeping mode, press and
hold “D” to display: Year, Month, Date.
Time Setting
1. In the timekeeping mode, press and
hold “A” until the seconds to flash
(flashing indicated in set mode).
2. Press “D” to reset the seconds.
3. Press “B” change to the next
selection.
4. Press “D” to increase the number,
press and hold to increase at high
speed.
5. Repeat step 3 and 4, the selection in the following
sequence:
Seconds Hour Minutes Year Month
Date.
6. Press “A” to exit the set state, after you set (The
day of week is automatically displayed in accordance
with year, month and date setting).
To Next Page
Loading...
