Need help?Do you have a question about the Timbertech Impression Rail Express and is the answer not in the manual?
General| Brand | Timbertech |
|---|---|
| Model | Impression Rail Express |
| Category | Indoor Furnishing |
| Language | English |
Steps for determining post requirements and preparing them for installation.
Instructions for properly attaching 3-inch posts to deck surfaces using blocking.
Guidance on installing specific types of posts for stair runs.
Guidance on installing posts at the end locations of railings.
Procedures for fitting 90-degree corner posts to the structure.
Procedures for fitting 45-degree corner posts to the structure.
How to determine and mark the locations for center posts.
Methods for securing 2-inch posts to the deck structure.
Steps for installing crossover brackets on 2-inch posts.
How to cut and prepare level railing panels and H-channels for installation.
Attaching the pre-cut level railing panels to the installed posts.
Cutting and installing bottom rail snaps onto the railing channels.
Fastening unpunched H-channels to posts for the railing system.
Steps for installing foot blocks under the bottom rail for support.
Attaching the top rail snaps to the H-channels for the railing.
Optional procedure for attaching panels to structural surfaces using wall mounts.
Positioning and marking stair railing panels for precise installation.
Attaching stair panel clips to posts at the locations marked on the stair panel.
Fastening the stair panels to the posts using clips and screws.
Cutting and installing bottom rail snap covers onto the stair railing channels.
How to cut and prepare unpunched H-channels for stair panels.
Attaching H-channels to posts for stair railing systems.
To Next Page