EasyManua.ls Logo

Time Machines TM2000B - User Manual

Time Machines TM2000B
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TM2000B / TM2500B
PTP and NTP Time Server
GPS Time Sourced
Installation and Operation Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Time Machines TM2000B and is the answer not in the manual?

Summary

Introduction to Time Server

Time Server Installation and Connections

GPS Antenna Location and Connection

Proper placement of the GPS antenna for optimal signal reception and connection details.

Power and Network Connectivity

Connecting the device's power supply and network interface for operation.

Front Panel LED Status Indicators

Understanding the meaning of the Power, Lock, and Second LEDs on the front panel.

Device Configuration Management

Web Interface Access and Default IP Configuration

How to access the device's configuration via web browser and its default IP address.

Network Configuration Settings

Configuring Netmask, Gateway, and DNS server addresses for network operation.

Device Specific Settings Configuration

Managing device name, IP, BNC/Serial outputs, and password for TM2000B/TM2500B.

Device Status Monitoring

GPS and Time Status Information

Monitoring GPS fix, satellite count, location, and current date/time.

System Performance Status Details

Tracking uptime, holdover time, OCXO correction, and software version.

Network Time Synchronization Status

Reviewing NTP peer status and PTP client connections for time accuracy.

Firmware Update Procedure

Firmware Update Process and Notes

Instructions for updating the device firmware, including file types and important considerations.

SNMP Configuration and Management

SNMP Setup Options

Configuring SNMP enable, trap version, and notification methods.

SNMP Security and Authentication Settings

Setting up SNMPv2 community names and SNMPv3 user credentials and engine ID.

NTP Time Server Configuration

NTP Server Control and Holdover Settings

Starting, stopping, and configuring NTP server operation and holdover limits.

NTP Holdover and Remote Server Configuration

Managing holdover behavior and configuring remote NTP servers for time synchronization.

NTP Authentication and Manual Time Settings

Uploading NTP keys and manually setting device time for accurate synchronization.

PTP Time Synchronization Configuration

PTP Update Method and Domain Configuration

Configuring PTP sync packet generation and network domain for precise timing.

PTP Transmission Method and Priority Settings

Selecting PTP transmission mode (Unicast/Multicast) and priority levels.

PTP Post-Holdover and Multicast Configuration

Defining PTP behavior after holdover and configuring multicast intervals.

About and System Management

Device Information and Contact Details

Accessing contact details, software version, and company information.

System Diagnostics and Reboot Options

Downloading log files for troubleshooting and performing a system reboot.

Troubleshooting and Recovery Procedures

GPS Lock Troubleshooting Guide

Diagnosing and resolving issues related to obtaining a GPS signal lock.

Factory Reset Procedure

Steps to reset the device to its original factory default settings.

Locator Data Query Feature

Locator Data Query Format

Understanding the structure and response packet for querying device location and status.

Technical Specifications

Time Server and GPS Module Specifications

Detailed specifications for the time server features and the GPS receiver module.

Antenna and OCXO Timing Specifications

Specifications for the GPS antenna and the TM2500B's OCXO timing information.

Time Machines TM2000B Specifications

General IconGeneral
BrandTime Machines
ModelTM2000B
CategoryServer
LanguageEnglish

Related product manuals