3.3.1 TM2000 Name
This is a generic entry that has no effect on the TM2000B operation other than to allow the user to
enter a name for the device to help recognize it when parameter updates are required.
3.3.2 IP Address
The IP address of the unit set to by entering a standard IPv4 dotted quad in this field. 192.168.1.20 or
10.10.0.96 are examples of acceptable formats for this field. Clicking the Submit button will set the
entered IP parameters.
3.3.3 Broadcast
The Broadcast entry is used to control the propagation of network broadcast packets on the network
and to what level they will propagate from the device. This is frequently opposite of the Netmask
setting. This is used by the PTP functions to advertise the presence of the server. Clicking the Submit
button will set the entered IP parameters. THIS IS NOT the address to point NTP and PTP clients
at, they should given the IP Address.
Installation and Operations Manual | Page 4
Web / timemachinescorp.com Email / tmsales@timemachinescorp.com Phone / (402) 486-0511
To Next Page
Loading...
