3.8.11 Multicast Configuration – Log Sync Interval
Sets the requested Sync Message Interval. The rate of sync packets is 2^(-value). The default of -7,
therefore makes the default rate 2^-(-7) = 128 packets per second.
3.8.12 Multicast Configuration – Log Min Delay Request Interval
The minimum permitted mean time interval between Delay_Req messages. A shorter interval makes
the TM2X00 react faster to the changes in the path delay. It's specified as a power of two in seconds.
Generally, this setting doesn't need adjustment on the TM2X00.
3.8.13 Multicast Configuration – Log min Peer Delay Request Interval
The minimum permitted mean time interval between Pdelay_Req messages. It's specified as a power of
two in seconds. Generally, this setting doesn't need adjustment on the TM2X00.
3.8.14 802.1AS Configuration – PTP Destination MAC
This is the MAC address that 802.1AS PTP messages will be sent. Default: 01:1B:19:00:00:00
3.8.15 802.1AS Configuration – P2P Destination MAC
This is the MAC address that 802.1AS Peer to Peer Delay messages are sent. Default:
01:80:C2:00:00:0E
3.8.16 802.1AS Configuration – Sync Timeout Count
This sets the number of sync/follow-up messages that can be missed before the Best Master Clock
election code is started. Setting this option to 0, disables it.
3.8.17 802.1AS Configuration – Max Neighbor Propagation Delay (ns)
This is the upper limit for peer delay measurements, in nano-seconds, before the port is marked as not
being 802.1AS capable.
3.8.18 802.1AS Configuration – Transport Specific Field
The transport specific field, it should range from 0 to 255. It generally has to match the client setting.
Installation and Operations Manual | Page 18
Web / timemachinescorp.com Email / tmsales@timemachinescorp.com Phone / (402) 486-0511
To Next Page
Loading...
