10
• Use the Adv/Ovr or Boost to change the day
grouping mode. This will step through the
following options;
24hour – Mo Tu We Th Fr Sa Su
5 day – Mo Tu We Th Fr (followed automatically
in programming by 2 day – Sa Su)
Individual day – Mo (followed automatically
in programming by each of the other days
of the week).
• Once the desired day grouping is selected,
press Prg button once to set and move onto
programming the ON/OFF times.
• The display will show
Prog 1, with dashes for
the hours and minutes;
Note: the example shown
is for 5 day + 2 day
programming.
• Use Adv/Ovr or Boost button to set the hour
for the first ON period.
• Press the Prg button once to set and move
you to the minutes.
• Use Adv/Ovr or Boost button to set the
minutes for the first ON period.
• Press the Prg button once to set and move
you to the Programme 1 OFF time.
• Use Adv/Ovr or Boost button to set the hour
for the first OFF period.
• Press the Prg button once to set and move
you to the minutes.
• Use Adv/Ovr or Boost button to set the
minutes for the first OFF period.
• Press the Prg button to scroll through Programme
2 ON, Programme 2 OFF, Programme 3 ON,
Programme 3 OFF, Programme 4 ON and
programme 4 OFF, adding in times as required.
Note: If further times are not required, just
To Next Page
Loading...
