Timeguard NTT03 User Manual

7
7
6. Battery
• The time switch has a factory fitted
rechargeable battery to give clock operation
and programme memory back up during
loss of mains supply.
• Before programming for the first time,
connect the unit to the mains for at least
15 minutes prior to pressing the Rst button
and programming the unit.
• If the display is not visible or very faint,
charge for 4 hours prior to pressing Rst
and programming.
• Approximately 720 hour battery reserve.
7. Reset
The time switch must be reset before programming
for the first time, or after subsequent discharge
for more than 5 days, and following a 4 hour
period of charging.
• Press the Rst button once using a pointed
object e.g. a pencil or a paper clip.
• The display will show all
characters/digits and then will
clear to show the following;
ASCO = Automatic Summer/
Winter Change Over.
• Use the Adv/Ovr button to change between
ON and OFF for the automatic summer time
adjustment and proceed to section 8.
8. Setting the clock
• Press and hold the Time button for 3 seconds,
the word Hold will show on the screen.
• After 3 seconds release the
Time button and the screen
will show the year;

Timeguard NTT03 Specifications

General

Brand	Timeguard
Model	NTT03
Category	Timer
Language	English