9
• Use Adv/Ovr or Boost button to set the hour
for the first ON period.
• Press the Prg button once to set and move
you to the minutes.
• Use Adv/Ovr or Boost button to set the
minutes for the first ON period.
• Press the Prg button once to set and move
you to the Programme 1 OFF time.
• Use Adv/Ovr or Boost button to set the hour
for the first OFF period.
• Press the Prg button once to set and move
you to the minutes.
• Use Adv/Ovr or Boost button to set the
minutes for the first OFF period.
• Press the Prg button to scroll through
Programme 2 ON, Programme 2 OFF,
Programme 3 ON, Programme 3 OFF,
Programme 4 ON and programme 4 OFF,
adding in times as required.
Note: If further times are not required, just
leave the dashes in place and scroll past the
rest of the programs using the Prg button.
• After Programme 4 has been entered, then
next day grouping will follow e.g. In this
example the day grouping will change
to 2 day – Sa Su Programme 1 ON.
• Programme the ON/OFF times as before.
• After the last OFF time for programme 4 has
been set, press the Prg button once to exit
the programme mode.
Note: At any stage in programming, if the
Prg button is pressed and held for 3 seconds,
the timer will return to normal operating mode.
To Next Page
Loading...
