Need help?Do you have a question about the Timeguard TRT034N and is the answer not in the manual?
Explains symbols on the programmer's display like heating status and clock format.
Describes the purpose of buttons like Boost, Advance, Select, and Reset.
Details how to connect mains supply and load (boiler) to the terminal block.
Explains how to set DIP switches for 5-2 or 7-day programming.
Instructions on how to reset the unit and what to expect on the display.
How to start the process of setting the clock and date.
How to choose between 12-hour and 24-hour clock display.
Step-by-step guide to set the current hour and minute.
Procedure to input the correct year.
How to adjust the current month and day values.
How to configure the daylight saving (GMT/BST) setting.
How to access the programming interface using the Set button.
How to choose which day's program to set.
How to set the first ON and OFF time for a selected day.
How to set the second and third ON/OFF times for a selected day.
How to duplicate settings from one day to another.
How to select the destination day to copy the program to.
How to save and exit the programming mode.
Instructions to copy programs to multiple days.
Explains the four available output modes (Always OFF, Always ON, etc.).
How to activate 1, 2, or 3 hour boost periods using the Boost button.
How to cancel an active boost period or set it to 0 hours.
How to illuminate the display and its timeout behavior.
How to set a holiday period from 0 to 31 days.
How to deactivate the holiday mode and remove the suitcase symbol.
Explains symbols on the programmer's display like heating status and clock format.
Describes the purpose of buttons like Boost, Advance, Select, and Reset.
Details how to connect mains supply and load (boiler) to the terminal block.
Explains how to set DIP switches for 5-2 or 7-day programming.
Instructions on how to reset the unit and what to expect on the display.
How to start the process of setting the clock and date.
How to choose between 12-hour and 24-hour clock display.
Step-by-step guide to set the current hour and minute.
Procedure to input the correct year.
How to adjust the current month and day values.
How to configure the daylight saving (GMT/BST) setting.
How to access the programming interface using the Set button.
How to choose which day's program to set.
How to set the first ON and OFF time for a selected day.
How to set the second and third ON/OFF times for a selected day.
How to duplicate settings from one day to another.
How to select the destination day to copy the program to.
How to save and exit the programming mode.
Instructions to copy programs to multiple days.
Explains the four available output modes (Always OFF, Always ON, etc.).
How to activate 1, 2, or 3 hour boost periods using the Boost button.
How to cancel an active boost period or set it to 0 hours.
How to illuminate the display and its timeout behavior.
How to set a holiday period from 0 to 31 days.
How to deactivate the holiday mode and remove the suitcase symbol.
General| Power Supply/Operating Voltage | 230V AC |
|---|---|
| Temperature Range | 5°C to 30°C |
| Control Type | Electronic |
| Display | LCD |
| Mounting | Surface |
| Switch Type | SPDT |
| Number of on/off programmes | 6 |
| Operating Mode | Programmable |
| Accuracy | ±0.5°C |
| Programmable Periods | 6 |
To Next Page
