Need help?Do you have a question about the Timeguard TRT047N and is the answer not in the manual?
Details technical specifications for the receiver unit, including power, rating, and dimensions.
Lists technical details for the transmitter, covering operating range, transmission, and dimensions.
Explains the layout and features of the transmitter's front interface, including display and controls.
Guidance on optimal placement of the receiver for effective control of heating systems.
Advice on ideal placement for the transmitter to avoid interference and ensure accuracy.
Detailed steps for mounting the receiver unit and connecting its wiring.
Instructions for attaching and securing the receiver's wall mounting plate.
Steps for mounting the transmitter and correctly inserting the batteries.
Guidance on how to install the transmitter's wall mounting plate.
Diagram and explanation for connecting mains supply and load (boiler) to the receiver.
Configuring temperature swing, PID, and boiler type using rear DIP switches.
Step-by-step guide to wirelessly pair the transmitter with the receiver unit.
How to adjust the target room temperature using the transmitter's +/- buttons.
Instructions for enabling and disabling the frost protection feature.
Details on activating and setting the night set back feature for temperature reduction.
Information on the indicator that appears when the transmitter batteries are low.
General| Voltage | 230V AC |
|---|---|
| Temperature Range | 5°C to 30°C |
| Operating Temperature | 0°C to 40°C |
| Control Type | Electronic |
| Display | LCD |
| Operating Mode | Heating |
| Number of on/off programmes | 6 per day |
| Battery Backup | Yes |
| Boost Function | Yes |
| Override Function | Yes |
| Accuracy | ±1°C |
| Hysteresis | 0.5°C |
| Type | Digital Thermostat |
| Mounting | Surface |
| Contact Rating | 3A |
| Programming Options | 7-day programming |
To Next Page
