Timewave DSP-599zx - Alternate Channel Gain

2 – Installation
2-14 March 6, 1997
Alternate Channel Gain
If you have selected dual mode for speaker/headphone, you can also set the
audio level of the alternate channel with respect to the active channel. This
allows the alternate channel to be heard at a lower volume than the active
channel. The range is 0.0 dB to -18 dB in 3 dB steps. The factory default is
0 dB.
1. Press
[Shift+Mode]
twice to enter Setup mode.
2. Rotate left knob until
,QVWDOO
appears on the bottom line of the dis-
play
3. Press the left knob to select.
4. Rotate left knob until
$OW&K *DLQ
appears on the bottom left of the
display
5. Press the left knob to select.
6. Rotate left knob until the chosen value appears on the bottom right of
the display
7. Press the left knob to accept choice and save. Press middle knob to
escape without saving changes.
8. Rotate left knob until your next function to change appears on the bot-
tom line of the display or press the middle knob to return to main set-
up menu.
Function
6
Shift
5
AGC
3
Bypass
Data
DSP-599zx
CW
Voice
Mode
1
Random
4
Tone
2
599-077
Setup
Test
Rcl/Store
Spkr/Chan
High Pass
Center Freq
Time