Setting the Alarm to Music
The Timex AM/FM radio alarm clock can be used as an alarm. This section will
explain how to set the alarm to music. Figure 5 shows the locations of the parts
needed to set this feature.
Minute
Button
Hour
Button
Alarm
Button
Power
Cord
Radio/Alarm
Switch
Tuning Wheel
AM/FM Band Switch
Figure 5. Locations of Parts Needed to Set Alarm to Music
To Set the Alarm to Music:
NOTE: Make sure you have set the clock before using the alarm.
1. Plug the power cord into an electrical outlet.
2. Hold down the alarm button; then press the hour button repeatedly until you reach
the hour you want the alarm to go off.
3. Continue holding down the alarm button; then press the minute button repeatedly
until you reach the minute you want the alarm to go off.
4. Move the AM/FM band switch to the AM position if you want the alarm to go off
to an AM station. Move it to the FM position if you want it to go off to a FM
station.
9
To Next Page
Loading...
