14
Operating the Alarms
Turning Off the Alarm
1. After the alarm sounds, press the
Alarm Reset/Off Button to turn off the alarm. This turns off the alarm
and automatically resets it for the following day. The Alarm Indicator will remain on the display.
2. To shut the alarm without resetting it, slide the Alarm Set Switches to the “Off” position, so that the
Alarm Indicators disappear from the display. If either of the Alarm Indicators is showing, the alarm will
sound at the set time.
Operating the Snooze Feature
To use the snooze feature, press the Snooze Bar when the alarm sounds. The alarm will turn off for
approximately six minutes before sounding again. You may repeat this process several times during the one-
hour alarm cycle.
Sleeping to Compact Discs
Note: For more information about playing CD’s, see the Listening to Compact Discs section of this manual.
1. Press the Play/Pause Button to begin playing the CD. Without any interference, the disc will play all
the way through until the end, then automatically shut off. If you wish, you can program a shorter track
selection. See the Programming and Playing Compact Discs section of this manual for further instruction.
2. You can adjust the volume to a comfortable level with the Volume Thumbwheel.
Note: If you use the Volume Thumbwheel to adjust the sleep volume level, this will affect the volume level
of the alarm the following morning.
3. To turn the CD off before the disc has finished playing, press the Stop Button or the
Alarm Reset/Off Button.
To Next Page
Loading...
Need help?
General
