15
Sleeping to Radio with Timer
Note: For more information about playing the radio, see the Listening to Radio section of this manual.
1. Press the Radio/ Sounds/Sleep On Button twice to enter the sleep mode. This sets the radio sleep
timer to the 90-minute setting. The sleep timer setting remains active for approximately ten seconds before
returning to the standard display. The Sleep Indicator will begin flashing, then stay lit.
2. Press the Radio/Sounds/Sleep On Button to select a 90-, 60-, 30-, or 15-minute sleep time.
3. Slide the Function Switch to AM or FM, and rotate the Tuni ng Thumbwheel to select a station.
If you have chosen to wake up to the radio, the station you set to sleep to will also function as the alarm
radio station. Use the Volume Thumbwheel to find a comfortable sleep volume level.
4. Press the
Alarm Reset/Off Button to turn off the radio before the sleep time has elapsed.
Sleeping to Nature Sounds with Timer
1. Press the Radio/Sounds/Sleep On Button twice to enter the sleep mode. This sets the nature sounds
sleep timer to the 90-minute setting. The setting remains active for approximately ten seconds before returning
to the standard display. The Sleep Indicator will begin flashing, then stay lit.
2. Press the Radio/Sounds/Sleep On Button to select a 90-, 60-, 30-, or 15-minute sleep time.
3. Slide the Function Switch to the “Sounds” setting, and slide the Nature Sound Switch to one of
the four nature sound choices: Wind, Forest, Brook, or Ocean. Use the Volume Thumbwheel to find
a comfortable sleep volume level.
4. Press the
Alarm Reset/Off Button to turn off the sounds before the sleep time has elapsed.